Electrical fault finding & repairs
Tripping fuses, dead sockets, flickering lights or a burning smell? We track down the cause with proper test equipment and put it right — fast, across Essex & London, with emergency call-outs available.
Common faults we fix
- An RCD or breaker that keeps tripping and won't reset
- A dead circuit — sockets or lights with no power
- Flickering or dimming lights
- A burning smell, buzzing, or warm sockets and switches
- Intermittent faults that come and go
- Problems after a leak, a storm, or DIY work
If you can smell burning or anything feels unsafe, switch it off at the consumer unit and call us straight away.
How we diagnose it
Guesswork costs money. We use proper insulation-resistance and continuity testing to isolate the fault to a specific circuit or accessory, rather than swapping parts and hoping. Once we've found it, we explain what's wrong in plain English and quote any repair before we start.
Emergency call-outs
We offer fast emergency call-outs across Essex and London for power loss and anything unsafe. The sooner we look, the smaller the problem usually is.
What does it cost?
A diagnosis visit typically runs £90–£220 depending on how much of the home is affected (out-of-hours adds to that), and any repair is quoted clearly once we've found the fault — you decide before we go ahead. Get a guide with our instant estimate tool or just call.
Areas we cover
We find and fix faults across Essex and London — Chelmsford, Brentwood, Basildon, Romford, Hornchurch, Upminster, Southend-on-Sea, Ilford and the surrounding towns. Check your postcode or call.
Fault finding FAQs
My electrics keep tripping — what's wrong?
Repeated tripping usually points to a faulty appliance, water getting into a fitting, or a damaged cable somewhere on the circuit. We use a methodical process to isolate the exact cause rather than guessing.
Do you offer emergency call-outs?
Yes — we provide fast call-outs across Essex and London for power loss, burning smells, sparks or tripping that won't reset. If something feels unsafe, switch it off and call us straight away on 07912 284977.
How much does fault finding cost?
Fault finding is charged for the diagnostic time plus any parts. We always agree the approach with you first, and many common faults are traced and fixed in a single visit.
What should I do if I smell burning or see sparks?
Turn off the affected circuit (or the main switch) at the consumer unit, don't use the socket or appliance, and call us immediately. Burning smells and sparks are genuine fire risks.